Претрага

Упит dcterms_subject_txt:administrativne procedure

296 items

  • The effect of finite driving rate on avalanche distributions

    Sonja Radić, Sanja Janićević, Dragutin Jovković, Đorđe Spasojević (2021)
    Statistics, Probability and Uncertainty,Statistics and Probability,Statistical and Nonlinear Physics

  • Adsorption and degradation of some psychiatric drugs by sol-gel synthesized titania-based photocatalysts: influence of tungsten and sodium content

    Nina L. Finčur, Maja J. Šćepanović, Mirjana Grujić-Brojčin, Biljana F. Abramović, Jugoslav B. Krstić, Aleksandar Kremenović, Tatjana Srećković, Aleksandar Golubović (2019)
    Mesoporous anatase nanopowders were doped with 0.05−0.5 mol% of W6, in order to obtain more efficient photocatalyst than TiO2 Degussa P25 in the degradation of amitriptyline (AMI) under simulated solar irradiation (SSI). Dominant XRPD peaks were ascribed to anatase phase, with additional peaks which could correspond to brookite, TiO2 bronze and sodium titanate, Na2Ti9O19. The Raman scattering measurements have confirmed anatase as dominant phase, with broad Raman feature at ~270 cm−1 possibly related to Ti–O–Na stretching vibration. All W-doped ...
    Sol-gel synthesis, Doped titania nanopowders, XRPD, Raman spectroscopy, Adsorption and photocatalytic degradation, Psychiatric drugs

  • Application of machine learning for diagnosing the operation of a deep well pump in oil production

    Maja Trikić (2024)
    This paper will thoroughly examine how machine learning can improve the diagnosis of deep well pumps by analyzing the role and function of the pumps, dynamograms, sensor technologies, and diagnostic methods.Our analysis will provide insights into modern techniques and approaches for enhancing the performance and reliability of oil production systems, targeting cost reduction and increased operational efficiency.
    deep well pump, dynamograms, machine learning, diagnostics of operating coditions,Random Forest, XGBoost
    ... 7.2. Selection of machine learning algorithms ... 7.3. Descriptors for data analysis ... aeananaanaaaaakaaaakataaot 67 7.4. Implementation procedure ... aaoaaaaaaaaaaaaaakataoe 68 7.5. Recommendations for further research ..........aaaaaaaaanaaaananaaaaaaaanannne 69 8.CONCLUSION ....aanaa a ...
    ... model performs well or requires further adjustments. 6.5. Experiment implementation To conduct experiments in this study, the following basic procedure was used, as shown in Figure 10. Initially, data is retrieved from a PostgreSQL database where logs have been previously classified. The results ...
    ... diagnosing operational conditions and sensor failures The best result was achieved with a model that utilized a pipeline recommended by the AutoML procedure. The model was trained using the following pipeline: MultinomialNB, PCA, and KNeighborsClassifier. The model's accuracy was 99.84%, and the zero-one ...

  • OER obrazovni sadržaji kao spona između akademskog i preduzetničkog znanja

    Ivan Obradović, Ranka Stanković, Marija Radojičić (2014)
    ... njihovo kreiranje i publikovanje zaodabrane predstavnike obrazovnih ustanova i kompanija. Konačno, jedan od ciljeva je i da se razviju i primene procedure i uputstva za kreiranje OER sadržaja kojima će se obezbediti kvalitetan obrazovni materijal. Za početak predviđeno je kreiranje OER sadržaja iz oblasti ...

  • Mogućnost infracrvene termografije pri detekciji štetnih gasova

    Stevan Đenadić, Vesna Damnjanović, Predrag Jovančić, Dragutin Jovković (2021)
    Curenje pojedinih gasova je opasnost koja može da izazove velike nezgode. Često je praćeno požarima i eksplozijama koji za posledicu mogu da imaju kako ljudske povrede, tako i štetan uticaj na ekologiju i ekonomiju. Da bi se izbegle takve situacije, preventivna inspekcija je od presudne važnosti. Curenje većine gasova se ne može uočiti golim okom a za otkrivanje i procenu stepena curenja može se koristiti tehnologija toplotnog snimanja (infracrvena termografija). U datom radu predstavljene su mogućnosti i ograničenja primene ...
    IC termografija, curenje gasa, termogram

  • Softverski alati za korišćenje resursa za srpski jezik

    Ivan Obradović, Ranka Stanković (2008)
    ... but this does not always have to be the case, since non-aligned parallel texts are also sometimes being used (Ohmori and Higashida, 1999). The procedure of transforming a parallel text into an aligned text consists of two basic steps. In the first step parallel texts are split into segments, that ...
    ... 52a used by Intex to a format used by NooJ. Figure 9 depicts a panel for conversion of a morphologi- cal dictionary into Unicode using a C# procedure, with additional parameters of conversion speci- fied. This module also enables conversion into LMF (Lexical Markup Framework) format (Fran- copoulo ...

  • Asbestos-Based Pottery from Corsica: The First Fiber-Reinforced Ceramic Matrix Composite

    Philippe Colomban, Aleksandar Kremenović (2020)
    Asbestos-containing pottery shards collected in the northeast of Corsica (Cap Corse) and dating from the 19th century, or earlier, have been analyzed by SEM-EDS, XRPD, FTIR and Raman microspectroscopy. Blue (crocidolite) and white (chrysotile) asbestos fiber bundles are observed in cross-sections. Most of the asbestos is partly or totally dehydroxylated, and some transformation to forsterite is observed to occur, indicative of a firing above 800 C. Examination of freshly fractured pieces shows a nonbrittle fracture with fiber pull-out, consistent with ...
    asbestos, CMC, Corsica, fiber, pottery
    ... as implemented in the Iridium Ultra software (IXRF Systems, Austin, TX, USA). The validity of measurements was monitored by applying, the same procedure to “Corning Museum B, C and D” and American “National Bureau of Standards (NBS 620)” certified glass-reference samples, as usual [11]: the error ...
    ... ++ + ++ Other phases: hematite (d); carbon (a,c). Materials 2020, 13, 3597 13 of 18 3.5. Heating-Induced Effects and Remarks on Preparation Procedure Most of the spectra exhibiting, a serpentinite-like signature show a rather broad ca. 680 cm-! peak (full width at half height between 50 and ...

  • Legal framework for recultivation of degraded areas caused by mining exploitation

    Radmila Gaćina (2023)
    Prilikom površinske i podzemne eksploatacije uglja eksploatacioni sistemi oštećuju veće ili manje površine zemljišta. Iskustva pokazuju da su oštećenja zemljišta znatno veća kod površinske eksploatacije, gde je prostora degradiran ne samo u konturi rudnika i okoline, već se promene takođe dešavaju u prirodnom okruženju. U članku su predstavljeni rezultati studije zakonskih okvira rekultivacije u nekim zemljama sveta i u Srbiji. Praktično iskustvo rekultivacije pokazalo je da iskorišćenje i devastacija tokom rudarske aktivnosti predstavljaju opasnost ne samo za pogođena ...
    rekultivacija, melioracija, otkopavanje uglja, zakonska regulativa
    ... develop mining plans that outline the process of land disturbance to obtain the mineral resource. The mining plan also outlines a reclamation procedure to restore the land to a productive post-mining land use (Skousen and Zipper, 2014) .This paper will give a brief overview of the legal regulations ...

  • Data from the Digital Repository of the Faculty of Mining and Geology in eScience (eNauka)

    Biljana Rujević, Mihailo Škorić (2024)
    The paper describes linking the Digital Repository of the University of Belgrade, Faculty of Mining and Geology, with the eScience system in terms of transferring metadata about the results of researchers' scientific work. The steps taken to ensure a smooth harvesting of metadata are outlined. Additionally, a presentation of additional improvements to the OAI system is provided, aiming to contribute to the automatic linking of authors with their results in the eScience system.
    репозиторијуми, еНаука, метаподаци, Рударско-геолошки факултет

  • Application of Expansive Mortars for the Formation of Artificial Screens During Blasting in Urban Areas

    Milanka Negovanović, Lazar Kričak, Stefan Milanović, Nikola Simić, Jelena Majstorović (2024)
    During construction of buildings in urban areas, sometimes there is a need to blast solid rock mass in the immediate vicinity of the surrounding buildings. In that case, the aim is not only to increase the efficiency of blasting, but also to reduce harmful effects of ground vibration induced by blasting. At the same time, it is very important to protect the buildings located in the safe zone from the blast site as well as remaining rock mass around ...
    expansive mortar, artificial screens, pressure, rock breaking, building foundation

  • ‘Blue-’ and ‘Brown-speckled’ pottery from Qalhât, the Sultanate of Oman (13–16th centuries): Comparison with traditional Omani 19–20 century productions

    Liliana Gianni, Hélène Renel, Aleksandar Kremenović, Philippe Colomban (2020)
    Representative ‘Blue speckled’ (13–16th centuries) and ‘Brown speckled’ (13–21st century) wares recovered from the excavations in Qalhât or collected around Bahlâ city (Sultanate of Oman) were characterized by XRPD, SEM-EDS, Raman/optical microspectroscopy, and thermal expansion. Minerals present in the body (quartz, augite and albite as major phases, calcite, dolomite, rutile, anatase, phosphate, hematite and magnetite as minor phases) were identified by XRPD and/or Raman spectroscopy. SEM-EDXS microanalysis was performed on the glazes in order to compare their composition, especially ...
    Firing, Glaze, Traditional ceramics, Provenance studies, Augite

  • Damage quantification of built stone on Dark Gate (Belgrade, Serbia): sample of damage index application for decay rate evaluation

    Maja Franković, Nevenka Novaković, Vesna Matović (2015)
    The Dark Gate is the monument of culture, part of the cultural and historical complex of the Belgrade Fortress. It is constructed of limestone blocks that after 270 years of exposure to environmental conditions and different anthropogenic influences show wide ranges of decay forms. During 2007, detail registration of all built limestone microfacies and weathering forms was done using tools of monument mapping. A correlation scheme ‘‘intensity– damage category’’ was made according to the type, intensity, and distribution of ...
    Krečnjak, mapiranje, Indeks raspadanja, brzina raspadanja, progresija
    ... conservation, monument mapping method is generally accepted as an essential part of con- dition survey, being cost-effective and non-destructive procedure that provides comprehensive information on the type and distribution of changes on the stone surface pro- duced by the weathering processes (Fitzner ...
    ... group 'Natural stones and weathering"/ Aachen University of Technology (Fitzner et al. 1995, 1997a, b) is cost-effective and non-destructive procedure that allows a quantitative registration, according to litho- types and to type, intensity and distribution of weathering forms. The mapping ...

  • Концепт расположивости при дефинисању ефикасног одржавања помоћне механизације на површинским коповима

    Radiša D. Đurić (2016-05-30)
    Оцена расположивости представља основну компоненту уинжењерском управљању опремом. Расположивост је свеобухватни концепткоји представља меру употребног квалитета техничких система, који садржичитаву серију парцијалних индикатора који се односе на време у раду ивреме у отказу система као и на његову функционалну погодност. Овадисертација даје структурну анализу парцијалних индикатора као и развојмодела њихове синтезе на ниво расположивости. Поменути подаци имајухибридни карактер (измерени и експертски добијени) и њихова интеграцијаи синтеза је остварена коришћењем фази пропозиције и фази закључивања.Овакав приступ омогућава оцену техничког система ...
    управљање опремом, инжењерство одржавања,расположивост, фази закључивање, прикупљање података, булдозер
    ... Средње време активног одржавања представља средње време трајање поступка одржавања и то само активног рада на одржавњу, искључујући све логистичке, административне и друге застоје. По правилу се дефинише за све спроведене поступке превентивног и корективног одржавања. Средње време између одржавања представља ...
    ... морају бити праћени и настојањима да се смањи неактивно време у процесу одржавања, које је проузроковано одговарајућим техничким, логистичким и административним чекањима. Ово захтева одговарајуће напоре у правцу планирања и стварања реалистичке концепције одржавања, критичку анализу планова одржавања (нивои ...
    ... Бушење и минирање Путно-колосечни Земљани Дизалични Транспортни Ремонтно- конзервацијски Чишћење и осигурање Техничка рекултивација Административно -социјални Докторска дисертација 46 У табели 3.1 дат је преглед основних група, подгрупа и елементарних помоћних радова на површинским коповима ...

  • Razvoj integralnog modela za optimizaciju diskontinualnog sistema proizvodnje na površinskim kopovima nemetala

    Miodrag Čelebić (2024)
    Izbor optimalne mehanizacije u diskontinualnom sistemu transporta je jedna od najvažnijih odluka koju treba donijeti prilikom projektovanja površinskih kopova. Pri izboru optimalne mehanizacije, uticaj ima veliki broj faktora, kako prirodnih – geoloških i ekoloških, tako i tehničkih, ekonomskih i socijanih. Neki od njih se mogu izraziti numerički, u određenim mijernim jedinicama, a neki opisno, lingvističkim varijablama, shodno uslovima koji vladaju na rudnim ležištima, a koje karakterišu visok stepen neizvjesnosti i neodređenosti kako prilikom istraživanja, tako i tokom procesa eksploatacije ...
    izbor mehanizacije, tehnologija eksploatacije, diskontinualani sistem, ekspertsko odlučivanje, lingvističke varijable, MCDM, FAHP

  • Phase relations and physical indicators of municipal waste from old landfills in Serbia

    Dragoslav R Rakić, Irena G Basarić Ikodinović, Jovana M Janković, Tina D Đurić (2021)
    Due to certain similarities of municipal waste and soil, usually for the determination of basic parameters of physical state, laboratory and field tests which are common in geotechnical investigations are used. It is often to construct an apparatus for special purpose to perform some specific laboratory and field tests. Therefore, different values of indicators of municipal waste physical state can be found in the literature. The basic reasons should be found in different definitions and methods that researchers use ...
    municipal waste, moisture content, unit weight, specific gravity, grain size distribution, porosityGeneral Computer Science
    ... fact that waste components cannot be easily identified, as well as because differences in the choice m #i.i| ii J5] Fig. 1. The applied procedure of municipal waste classification. The main objective of this methodology is to increase the accuracy and comparablility of data related to ...

  • Pre-failure deformation monitoring as rockfall prediction tool

    Miloš Marjanović, Biljana Abolmasov, Zoran Berisavljević, Marko Pejić, Petko Vranić (2021)
    General Engineering
    ... methods Data acquisition and processing were conducted for relatively long period, including first couple of years of pilot work, and a systematic procedure was adopted and iterated. 3.1. TLS Acquisition technique primarily involves direct time of flight (DTOF) TLS scanner Leica Scan Station P20 ...

  • Грешка инклинације код депозиционе реманетне магнетизације

    Mirko Petković, Vesna Cvetkov (2019)
    ... tangent of the measured inclinations and the tangent of the assumed inclinations is inversely proportional to the flattening factor. This procedure gives reliable results if the carrier of the remanent magnetization is magnetite, which is most common in sedimentary rocks. If the carrier of remanent ...

  • Integrisano okruženje za pripremu paralelizovanog korpusa

    Ivan Obradović, Ranka Stanković, Miloš Utvić (2007)
    Razvoj paralelizovanih korpusa zahteva pripremu paralelnih tekstova za njihovu integraciju u paralelizovani korpus. Reč je o jednom kompleksnom zadatku koji se može rešiti na različite načine, i koji mora da se odvija u nekoliko koraka. U ovom radu najpre je iznet postupak pripreme paralelnih tekstova za paralelizovani korpus koji se koristi u Grupi za jezičke tehnologije Univerziteta u Beogradu. Potom je dat kratak pregled programa (XAlign, Concordancier, WS4LR), odnosno softverskih alata koji se pri tome koriste. Nedostatak udobnog okruženja ...
    ... complex task, which can be solved in different ways, and which has to be realized in several of steps. At the beginning of this paper we outline the procedure for preparation of parallel texts for aligned corpora which is being used in the Human Language Technology Group at the University of Belgrade. Texts ...

  • Part of Speech Tagging for Serbian language using Natural Language Toolkit

    Ranka Stanković, Boro Milovanović (2020)
    Dok se razvijaju složeni algoritmi za NLP (obrada prirodnog jezika), osnovni zadaci kao što je označavanje ostaju veoma važni i još uvek izazovni. NLTK (Natural Language Toolkit) je moćna Python biblioteka za razvoj programa zasnovanih na NLP-u. Pokušavamo da iskoristimo ovu biblioteku za kreiranje PoS (vrsta reči) oznake za savremeni srpski jezik. Jedanaest različitih modela je kreirano korišćenjem NLTK API-ja za označavanje. Najbolji modeli se transformišu sa Brill tagerom da bi se poboljšala tačnost. Obučili smo modele na označenom ...
    obrada prirodnog jezika, mašinsko učenje, neuronske mreže
    ... is made simple with the help of NLTK. There are a plenty of tagger models packaged in NLTK that can be trained. Every tagger has an evaluation procedure that strips down the tags from the given text, tags the text with the newly created tagger and reports the accuracy on all tokens. This measure ...

  • Adaptive neuro-fuzzy prediction of operation of the bucket wheel drive based on wear of cutting elements

    Filip Miletić, Predrag D. Jovančić, Milos Milovančević, Dragan Ignjatović (2020)
    The capacity of the rotor excavator depends largely on the operation of the subsystem for digging. There is a great contribution to the correct and sharp teeth when the capacity is the highest. In the function of time, the teeth become clogged due to abrasive wear, or changes in their geometric shape. To analyze the bucket wheel drive in depend on wear of the cutting elements in this study adaptive neuro fuzzy inference system (ANFIS) approach was implemented. ANFIS ...
    Pogon rotornog točka, habanje, rezni elementi, ANFIS