Претрага

Упит dcterms_subject_txt:fuzzy dynamic TOPSIS

213 items

  • Multi-Criteria Fuzzy-Stochastic Diffusion Model of Groundwater Control System Selection

    Dušan Polomčić, Zoran Gligorić, Dragoljub Bajić, Miloš Gligorić, Milanka Negovanović (2019)
    When considering data and parameters in hydrogeology, there are often questions of uncertainty, vagueness, and imprecision in terms of the quantity of spatial distribution. To overcome such problems, certain data may be subjectively expressed in the form of expert judgment, whereby a heuristic approach and the use of fuzzy logic are required. In this way, decision-making criteria relating to an optimal groundwater control system do not always have a numerical value. Groundwater control scenarios (alternatives) are identified through hydrodynamic ...
    expert judgment, linguistic variables, fuzzy dynamic TOPSIS, hydrogeology, groundwater control system, open-cast mine, geometric Brownian motion

  • Model of Strategic Decision Making in Mining Industry Based on Fuzzy Dynamic TOPSIS Method

    Gligorić Miloš, Gligorić Zoran (2015)

  • Risk Evaluation: Brief Review and Innovation Model Based on Fuzzy Logic and MCDM

    Stevan Djenadic, Milos Tanasijevic, Predrag Jovancic, Dragan Ignjatovic, Dejan Petrovic, Ugljesa Bugaric (2022)
    The risk assessment of engineering systems represents an important part of the quality of service and dependability. The existing methods for risk evaluation use crisp sets for rating partial indicators’ proposition and their cumulative products as an overall indicator. In this paper, existing FMEA and FMECA methods have been improved using the fuzzy expert system for calculating the risk priority number. The application of fuzzy logic allows the use of linguistic descriptions for risk analysis. In this way, the ...
    rizik, inženjerski sistemi, fazi logika, višekriterijumske metode

  • Underground loading-haulage equipment selection with application of topsis method with different weighting methods of criteria

    Vladimir Krivošić, Luka Crnogorac, Rade Tokalić (2024)
    The choice of adequate mining machines is one of the most complex problems in the underground exploitation of mineral raw materials. The weight of such a decision is reflected in the high prices of these machines and the occurrence of even greater costs during their use if their choice was wrongly conceived. There are numerous examples from practice in which such decisions were made solely on the basis of comparing the prices of machines, without considering any of the ...
    utovarno-transportna mehanizacija, izbor, TOPSIS, entropija, standardna devijacija, težina kriterijuma

  • Determination the advantage of solution in Eastern Serbia using the FTOPSIS method and comparison with the TOPSIS method

    Sandra Milutinović, Milena Kostović, Ivana Jovanović, Miomir Mikić, Daniel Kržanović (2022)
    FTOPSIS, TOPSIS, MCDM

  • Eksploatacioni učinci ugljenih sistema na površinskom kopu Tamnava–Zapadno polje

    Marko Lazić, Filip Miletić, Milena Lekić, Veljko Rupar, Željko Petrović, Lazar Žujović (2021)
    U radu su analizirani eksploatacioni učinci ugljenih sistema na površinskom kopu Tamnava–Zapadno polje. Period analize je prvih šest meseci tekuće godine. Analiza je vršena sa aspekta ostvarene proizvodnje, kvaliteta uglja, efektivnog vremena rada, kapacitetnog i vremenskog iskoršćenja i zastoja sistema. Za poređenje podataka različitih parametara koji po svojoj prirodi nisu međusobno uporedivi, u radu su korišćene metode višekriterijumskog odlučivanja.
    proizvodnja uglja, zastoji, metode višekriterijumskog odlučivanja
    ... [9] Tsaur R–C.,,Decision risk analysis for an interval TOPSIS method” Applied Mathematics and Computation 218(8), pp. 4295–4304, 2011. doi:10.1016/j.amc.2011.10.001; [10] Krohling, R.A., & Pacheco, A.G.C. (2015). A-TOPSIS - An Approach Based on TOPSIS for Ranking Evolutionary Algorithms. Procedia Computer ...
    ... odlučivanja postoji više različitih metoda: · PROMETHEE metoda, · VIKOR metoda, · TOPSIS metoda, · ELECTRE metoda i · AHP metoda. Za analizu eksploatacionih učinaka ugljenih sistema korišćene su dve metode, VIKOR i TOPSIS metoda. 3.1 VIKOR metoda Metodu VIKOR razvio je Serafim Opricović, za potrebe rešavanja ...
    ... (4) gde je: (5) Rangiranje se izvodi sortiranjem alternativa prema merama Rj, Sj i Qj. 3.2 TOPSIS metoda Metoda TOPSIS je zasnovana na konceptu da izabrana alternativa treba da ima najkraće rastojanje od idealnog rešenja, kao i najduže rastojanje od anti–idealnog ...

  • Indeksi kontrole održavanja i korišćenja rotornog bagera

    Jovana Mitrović, Predrag Jovančić, Dragan Ignjatović, Stevan Đenadić, Filip Miletić (2023)
    Razvoj površinske eksploatacije se u velikom stepenu zasniva na svestranoj mehanizaciji rudarskih radova. Kako bi se zadovoljili potrebni kapaciteti, neophodna je primena savremene mehanizacije, velikih kapaciteta i pouzdanosti u radu. Naime, sa stepenom povećanja mehanizovanosti radova smanjuje se broj zaposlenih radnika, povećava produktivnost rada, smanjuju troškovi po jedinici proizvoda, a samim tim i povećava ekonomičnost površinske eksploatacije. Predmet istraživanja su rotorni bageri SRs 1200 koji predstavljaju samohodne mašine kontinuiranog dejstva namenjene za otkopavanje jalovine i korisne supstance na površinskim ...
    rudarstvo, rotorni bager, indeksi održavanja, indeksi korišćenja, TOPSIS

  • A decision support system for mine project selection under uncertainty using fuzzy topsis technique

    Gligorić Zoran, Beljić Čedomir, Gluščević Branko, Jovanović Saša (2013)

  • Model of selection of longwall roadway drivage technology using fuzzy topsis method

    Gligorić Zoran, Tokalić Rade, Beljić Čedomir, Jovanović Saša (2011)

  • Multi - Attribute Technological Modeling of Coal Deposits Based on the Fuzzy TOPSIS and C - mean Clustering Algorithms

    Gligorić Miloš, Gligorić Zoran, Beljić Čedomir, Torbica Slavko, Štrbac-Savić Svetlana, Nedeljković Jasmina (2016)

  • Effectiveness Analysis of Different Bucket-wheel Excavators

    Stevan Đenadić, Predrag Jovančić, Dragan Ignjatović, Miloš Tanasijević, Filip Miletić (2021)
    Coal production in open-pit lignite mines in the Republic of Serbia is performed with continuous work systems. In addition to coal production, the same systems are used for the exploitation of large quantities of overburden. According to the reliability concept, continuous systems are in linear connection. If the failure occurs in one part of the system, that will produce a downtime of the entire system. The initial and most important factor of continuous systems is the bucket-wheel excavator. It ...
    bucket-wheel excavator, open-pit coal mine, mining, multi-criteria decision methods

  • Utvrđivanje eksplotacionih učinaka sistema na otkrivci na površinskom kopu Tamnava-Zapadno polje primenom Fuzzy Topsis metode

    Marko Lazić, Filip Miletić, Lazar Žujović (2022)
    Planiranoj proizvodnji uglja na površinskim kopovima prethodi nesmetano i kontinuirano otkopavanje otkrivke. Kako bi se obezbedila potrebna količina uglja, sistemi na otkrivci moraju uvek biti korak ispred u dinamici razvoja kopa. Velika produktivnost, visoki kapaciteti i dobar koeficijent vremenskog iskorišćenja, treba da budu odlika rada sistema putem kojih se vrši otkopavanje otkrivke. Kroz ovaj rad izvršena je analiza eksploatacionih učinaka za posmatrani period po smenama, kako bi se utvrdilo koja je od pomenutih smena ostvarila najbolje rezultate.
    otkrivka, kapacitet, kapacitet, vreme rada i zastoja

  • Development of the hybrid MCDM model for evaluating and selecting bucket wheel excavators for the modernization process

    Snezana Savkovic, Predrag Jovancic, Stevan Djenadic, Milos Tanasijevic, Filip Miletic (2022)
    This paper presents a methodology for evaluating and ranking different bucket wheel excavators (BWE) for determining which machine should enter in the process of revitalization and modernization. Various multicriteria methods are used. Combining them achieves the best effect when choosing BVE for the modernization process. AHP, TOPSIS, VIKOR, and PROMETHEE methods are used. The hybrid models are developed from the multi-criteria decision making (MCDM) methods and they are used to evaluate the basic indicators that characterize the operation of ...
    višekriterijumsko odlučivanje, rotorni bageri, modernizacija, ekspertska analiza

  • Analiza primene višekriterijumskih metoda u optimizaciji izbora hidruličnih bagera na površinskim kopovima uglja

    Stevan Đenadić, Predrag Jovančić, Dragan Ignjatović, Filip Miletić, Ivan Janković (2019)
    Hidraulični bageri primenjuju se u različitim oblastima privrede a najzastupljeniji su u građevinarstvu i rudarstvu. Na površinskim kopovima sa kontinualnim sistemima, klasifikuju kao pomoćna mehanizacija a na površinskim kopovima sa diskontinualnim sistemima, kao osnovna mehanizacija. Kako je u oba slučaja njihova primena neizostavna, važno je izvršiti adekvatnu analizu postojećih podataka, u cilju optimizacije izbora tipa hidrauličnog bagera u odnosu na uslove rada datog površinskog kopa. U radu su opisane različite višekriterijumske metode koje su korišćene za analizu hidrauličnih bagera. ...
    višekriterijumske metode, površinski kop uglja, pomoćna mehanizacija, hidraulični bager
    ... Vehicles, Energy, 34, pp. 112-125, 2009. DOI: 10.1016/j.energy.2008.09.004 [10] Ashrafzadeh M, Rafiei F M, Isfahani M-N, Zare Z, Application of fuzzy TOPSIS method for the sele- ction of Warehouse Location: A Case Study. Interdi- sciplinary, Journal Of Contemporary Research In Business, 3, pp. 655-671 ...
    ... alter- nativa Ai (od najbolje do najlošije). Rangiranje alternativa u izboru (hidrauličnih bage- ra) prema metodi TOPSIS data je u tabeli 9. Tabela 9. Rezultati primene TOPSIS metode TOPSIS Alternativa proizvođač tip izračunati koeficijent rang 14 Oktobar BGH 1000G 0,28462 3 Caterpillar ...
    ... 1000G 1,0000 1,0000 1,0000 3 Caterpillar 323 DLH 0,5997 0,5197 0,4396 2 New Holland E215 B 0,0000 0,0000 0,0000 1 4.4 TOPSIS metoda Metoda TOPSIS je zasnovana na konceptu da izabrana alternativa treba da ima najkraće rastojanje od idealnog rešenja i najduže od anti-idealnog rešenja ...

  • Conversion of land areas after coal mine closure and reclamation

    Radmila Gaćina, Bojan Dimitrijević, Sanja Bajić (2023)
    Otkopavanje uglja površinski i podzemno praćeno je degradacijom zemljišta, promenom formiranja predela i izmenom flore i faune. Od velikog značaja je razvoj novih naučno utemeljenih pristupa obnovljanje antropogeno poremećenih predela zasnovanih na formiranju rekultivacionih i rudarskih tehnologija. Apsolutno je neophodno obezbediti sveobuhvatno kvalitetno očuvanje zemljišnih i vodnih resursa i odrediti rekultivisano zemljište za novu namenu. U ovom članku je dat pregled najpopularnijih metoda rekultivacije zemljišta i mogućnosti rekultivacije zemljišta nakon završetka rekultivacije i zatvaranja rudnika uglja.
    rekultivacija, melioracija, revitalizacija, otkopavanje uglja, održivi razvoj
    ... reclamation model on which all further planning activities depend, can be used various multi-criteria decision-making methods such as Promethee, AHP, TOPSIS. Decision support models consider several criteria to determine the optimum solution, also used to support decision makers in solving complex problems ...
    ... comprehensibility, as rank reversal, when alternatives should have the shortest i ; NE ability to measure the relative order of preference changes when TOPSIS geometric distance from . NINA NR performance for each alternative | an alternative is added to or the positive ideal : : . :. : in a simple ...
    ... https://doi.org/10.1016/J.jenvman.2021.114352 Yu, Xueyi, Chi Mu, and Dongdong Zhang. "Assessment of land reclamation benefits in mining areas using fuzzy comprehensive evaluation." Sustainability 12.5 (2020): 2015. https://doi.org/10.3390/su12052015 Jackson, S.T., Hobbs, R.J. Ecological restoration ...

  • The preliminary selection of oil reservoir in Serbia for carbon dioxide injection and storage by a multicriteria decision-making approach: a case study

    Lola Tomić, Vesna Karović Maričić, Dušan Danilović (2021)
    geološko skladištenje CO2, naftna ležišta, Srbija, VIKOR, TOPSIS

  • Modeliranje tehnoloških procesa u rudarstvu u uslovima nedovoljnosti podataka primenom teorije grubih skupova

    Zoran M. Štirbanović (2015-07-01)
    Rudarstvo, a u okviru njega i priprema mineralnih sirovina, se odlikuje složenošću tehnoloških procesa što je posledica velikog broja uticajnih parametara. Samim tim je potrebno biti veoma obazriv prilikom donošenja odluka u oblasti rudarstva. U cilju što efikasnijeg funkcionisanja procesa, moguće je primeniti različite metode koje služe za pojednostavljenje procesa odlučivanja. Jedna od takvih metoda jeste i teorija grubih skupova. Ona predstavlja relativno novu matematičku teoriju koja je pogodna za razumevanje nepreciznih i nepotpunih podataka kao i za otkrivanje ...
    rudarstvo, priprema mineralnih sirovina, teorija grubih skupova, višekriterijumsko odlučivanje, flotacijsko jalovište, flotacijski kolektor, flotaciona mašina
    ... Zanimljivo je uporediti definicije klasičnih skupova, rasplinutih (fuzzy) skupova i grubih skupova. Klasični skup je primitivni pojam i definiše se intuitivno ili aksiomatski. Rasplinuti (fuzzy) skupovi se definišu korišćenjem funkcije fuzzy pripadnosti, koja uključuje napredne matematičke strukture ...
    ... rasplinute (fuzzy) pripadnosti. Svojstva 5 i 6 pokazuju da se pripadnost za uniju i presek skupova, generalno ne može izračunati iz pripadnosti njihovih članova, kao što je slučaj kod rasplinutih (fuzzy) skupova. Prema tome gruba pripadnost je formalno generalizacija rasplinute (fuzzy) pripadnosti ...
    ... metode utiliteta, jer se predlažu konkretne (šest) forme funkcije (funkcije preferencije) preko kojih se definiše i utilitet. 2.6. Metoda TOPSIS Metoda TOPSIS (engl. Technique for Order Preference by Similarity to Ideal Solution), zasnovana je na konceptu da izabrana alternativa treba da ima najkraće ...

  • Fuzzy optimization in hydrodynamic analysis of groundwater control systems: Case study of the pumping station “Bezdan 1”, Serbia

    Dragoljub Bajić, Dušan Polomčić (2014)
    A groundwater control system was designed to lower the water table and allow the pumping sta-tion “Bezdan 1” to be built. Based on a hydrodynamic analysis that suggested three alternative solutions, mul-ticriteria optimization was applied to select the best alternative. The fuzzy analytic hierarchy process methodwas used, based on triangular fuzzy numbers. An assessment of the various factors that influenced the selec-tion of the best alternative, as well as fuzzy optimization calculations, yielded the “weights” of the alternativesand the ...
    groundwater lowering, groundwater management scenario, fuzzy analytic hierarchy process,expert knowledge, triangular fuzzy numbers, linguistic variables
    ... 2, the calculated values of the fuzzy synthetic extent were as follows: According to Step 3, the fuzzy numbers were com- pared and the degree of possibility of two triangular fuzzy numbers (i.e. their values of fuzzy synthetic extent) was determined as follows: Fuzzy optimization in hydrodynamic analysis ...
    ... SINGH et al. 2007; UDDAMERI et al. 2014; KARNIB 2014 ). One branch of fuzzy logic applied in hydrogeology is fuzzy optimization. The present paper describes an application of multicriteria fuzzy optimization - the so-called fuzzy analytic hierarchy process (FAHP), to select the optimal groundwater management ...
    ... = 1, 2, …, m are triangular fuzzy numbers. Then, taking into account the membership function of the triangular fuzzy numbers, the value of the fuzzy synthetic extent is computed using the expression: Step 3. In this step the degree of possibility of two triangular fuzzy numbers (Fig. 3) M1 = (l1, s1 ...

  • Dynamic and Static Elastic Properties - Laboratory Investigations of Metamorphites of the "Vranjska Banja" Series

    Jelena Majstorović, Bojan Dimitrijević, Suzana Lutovac, Snežana Savković, Miloš Gligorić (2021)
    Metamorphites of the series “Vranjska banja” built predominantly of high crystallinity schist series, alternately layered double mica, gneiss, leptonite and micaschist. For the construction of the “Prvonek” dam were carried out laboratory investigations of dynamic and static elastic properties on micashist and gneiss samples in the perpendicular and parallel direction to the foliation. These investigations provided monitoring of the rock mass anisotropy properties and greater reliability of the design parameteres. As the design of mining and construction facilities becomes ...
    micashist, gneiss, foliation, dynamic properties, static properties

  • Correlation of uniaxial compressive strength with the dynamic elastic modulus, p –wave velocity and s –wave velocity of different rock types

    Jelena Majstorović, Miloš Gligorić, Suzana Lutovac, Milanka Negovanović, Luka Crnogorac (2019)
    Knowing mechanical properties of rocks incorporated with ultrasonic waves velocities investigations provide a secure basis for mine modelling. Uniaxial compressive strength, dynamic elastic modulus and ultrasonic waves velocities are just some of the rock properties that indicate on presence of discontinuities, stratification and fissures of rocks. Determining the relationship of these rock properties testing the rock samples that are corresponding to different rock types extracted from different mineral deposits represents the core of this study. In this paper, we ...
    линеарна регресија, метода најмањих квадрата, динамички модул еластиности, брзина уздужних таласа